Après plus d'un mois de version beta, la version finale de posLoader 4 a été mise à disposition par stfour.
postLoader est une extension de la fonction autoboot de Priiloader permettant de lancer les homebrews avec sa propre interface. Il vise à remplacer les forwarders, la HBC, les chaînes système avec support de la NAND émulée.
La chaîne forwader officielle est téléchargeable >>ici<<
Général
Lors du lancement depuis PriiLoader, obtention grâce à AHBPROT des pleins droits matériels pour les homebrews
Démarrage automatique au boot de votre application/chaine : si vous n'appuyez pas sur (A) à temps pour entrer dans le mode interactif, postLoader lancera l'application prédéfinie (si cette fonctionnalité est activée)
Accès direct à BootMii
Support des fenêtres d'attente (splash screens) personnalisées (uniquement depuis un support SD)
Support complet de l'environnement UNEEK. Fonctionnement non certain pour SNEEK
Support des Wiimotes et des manettes GameCube
Intégration d'un sélecteur de NAND UNEEK
Mise à jour de WiiLoad : si vous envoyez le fichier postLoader.dol via WiiLoad, la mise à jour de postLoader sera faite (après confirmation)
Support avancé de oneek2o
Accès USB pour les homebrews (cf. historii.txt pour des informations importantes)
Support de multiples mémoires NAND pour des jeux de différentes régions
Regénérateur intégré de mémoire cache pour les jeux (partiellement implémenté, cf. historii.txt)
Lanceur de jeux Uneek+DI (cf. historii.txt)
Support des jaquettes
Support des notes pour chaque "title"
Forwarder pour les loaders USB
Support de CFG USB Loader, USB Loader GX et WiiFlow (pour le moment WiiFlow plante)
Support des jaquettes
Support des notes pour chaque "title"
Support du choix de l'IOS
Jeux GameCube DML
Support des jaquettes
Support des notes pour chaque "title"
Support du choix de l'IOS
Possibilité de copier les jeux depuis un support USB vers une carte SD avant de les lancer
Homebrew
Alternative à la HBC : il peut être utilisé pour parcourir les homebrews, avec sa propre interface
Possibilité de masquer les homebrews dangereux
Support complet des arguments du fichier meta.xml et des autres tags
Support des sous-dossiers (cf. notes)
Possibilité de parcourir les supports SD et USB (FAT32 sur la première partition active)
Support de WiiLoad (direct, ficher DOL compressé, archive ZIP)
Chaines
?‰mulation de mémoire NAND (cIOSx/Waninkoko sur le slot 249)
AHBPROT requis pour parcourir la mémoire NAND réelle (sinon l'IOS 249 est utilisé)
Alternative à la chaîne système Wii : possibilité de parcourir et de lancer des chaînes, des WiiWares et des jeux Virtual Console
Possibilité de lancer des "titles" depuis la mémoire NAND réelle ou émulée, depuis une périphérique SD ou USB avec le support des dossiers
Les "titles" peuvent être triés par note et/ou masqués
Support du tri interactif des applications
Tri des "titles" par note/nom
Filtre des "titles" (chaînes système/WiiWare/NeoGeo/C64, etc...)
Recherche rapide des "titles"
Téléchargement des icons des "titles" depuis WiiTDB
Support d'un dossier alternatif pour la mémoire NAND (autre que la racine)
postLoader peut être lancé comme n'importe quel homebrew. Quoi qu'il en soit, vous en obtiendrez le meilleur en suivant ceci :
(A) Mémoire NAND réelle : extension de PriiLoader via priibooterGUI (cf. Applications additionnelles ci-dessous) [RECOMMANDE]
AVANTAGE : Facilité de mise à jour, tous les bénéfices de priibooterGUI INCONV?‰NIENT : Carte SD indispensable dans la Wii
Copier postLoader dans le dossier apps\postloader de votre carte SD ou support USB, comme tout homebrew.
Copier à la racine de la carte SD le fichier boot.dol se trouvant dans le dossier apps\priibootergui de l'archive
Démarrer PriiLoader en maintenant appuyé le bouton RESET au démarrage de la Wii
Choisir "Installer/Charger un fichier" depuis le menu de PriiLoader ou "Lancer/Installer un homebrew" depuis celui de PreFiix
Choisir le fichier boot.dol
Retourner au menu principal
Choisir :
"Options -> Autoboot: Fichier Installé" pour PriiLoader
"Paramètres de PreFiix-> Démarrage automatique : sur le homebrew installé" pour PreFiix
Choisir :
"Options -> Retour vers: Autoboot" pour PriiLoader
"Paramètres de PreFiix -> Retourner vers: démarrage automatique" pour PreFiix
Si vous le souhaitez, vous pouvez supprimer le fichier boot.dol de la carte SD
(B) neek2o/UNEEK : extension de PriiLoader via priibooterGUI
Copier postLoader dans le dossier apps\postloader de votre carte SD ou support USB, comme tout homebrew.
Copier à la racine de la carte SD le fichier neekbooter.dol.
Lancer votre environnent NEEK et appuyer sur RESET afin de lancer PriiLoader.
Choisir "Installer/Charger un fichier" depuis le menu de PriiLoader ou "Lancer/Installer un homebrew" depuis celui de PreFiix
Choisir le fichier neekbooter.dol
Retourner au menu principal
Choisir :
"Options -> Autoboot: Fichier Installé" pour PriiLoader
"Paramètres de PreFiix -> Démarrage automatique : sur le homebrew installé" pour PreFiix
Choisir :
"Options -> Retour vers: Autoboot" pour PriiLoader
"Paramètres de PreFiix -> Retourner vers : démarrage automatique" pour PreFiix
Si vous le souhaitez, vous pouvez supprimer le fichier priibooterGUI.dol de la carte SD
postLoader DOIT être présent à la racine de la carte SD qui doit, elle, être insérée dans la Wii
priibooterGUI.dol : priibooter est une petite application disposant d'une interface graphique dont le but est d'être installée avec PriiLoader. Elle permet de :
Démarrer (en retenant la dernière opération [carte SD requise])
postLoader depuis SD:\apps\postloader\boot.dol ou USB:\apps\postloader\boot.dol
la HBC
le Menu Sytème
NEEK (BootMii)
Activer la fonctionnalité de changement du dossier NAND de postLoader UNEEK.
neekbooter.dol : ?€ installer avec PriiLoader sous NEEK. Il démarrera postLoader depuis SD:\apps\postloader\boot.dol ou ISFS:\apps\postloader\boot.dol.
Dossiers NAND : Les dossiers NAND alternatifs sont supportés uniquement sur carte SD et périphérique USB, sur la première partition active.
notes : Les ISO GameCube (déjà convertis avec DiscEX) doivent être copiés dans le dossier USB:\ngc (partition FAT 32 principale). postLoader prendra soin de copier le jeu dans SD:\games si besoin. Les icône des jeux sur support USB sont grisés. Le processus de copie est lent (1750 ko/s on ma carte SD) S'il n'y a plus de place sur la carte SD, postLoader demandera de supprimer quelques jeux.
Boutons (durant l'initialisation - temps dépendant de la rapidité de l'initialisation de l'USB + 2 sec)
WII Games selection bug under neek(2o) should be fixed
postLoader 4.1.0
Added basic support for neek2o r95 (note that older neek2o versions are supported no more)
Removed built in neek2o game scanner
Fixed detection of elf file parameters that could crash executed programs
postLoader 4.0.9
fixed another neek code dumps ! note that postloader is unable to ISFS access to /sneek/nandcfg.bin in latest neek2o betas
postLoader 4.0.8
fixed neek code dumps
postLoader 4.0.7
removed an annoying debug message
postLoader 4.0.6
now using the open source stub by fix/megazig. Old stub.bin can be removed from /ploader folder
Fixed a dump with neek2o diconfig.bin file.
devolution: postloader support now creation/managment of up 8 card images, per game selecatable. memcard.bin, memcard1.bin....memcard7.bin (also _jap equivalent)
Changed a bit the selection screen
some code clean
postLoader 4.0.5
Added support for Devolution r115. 16mbyte memory card dumps no longer required, so feel free to use ctr-gcs/nugasa/gmcc dumps. (daxtsu)
postLoader 4.0.4
added USB_Deinitialize(). May help executed application that reload ios58 without checking if they are already in 58
fixed neek_UID_Add memory allocation
forwarder channel v5: Added video initialization code and an on screen message...
postLoader 4.0.3
fixed gc/classic auto repeat handling
minor changes
postLoader 4.0.2
fixed homebrew/emulator/wii/gc game menus popping up when cancelling the launch of them on GC controller (daxtsu)
postLoader 4.0.1
added NODISC2 patching for DM 2.2+ (daxtsu)
postLoader 4.0.0
fixed a crash caused by cover cache when autostarting something (thx daxtsu)
fixed a (long) delay when stopping wiiload thread when in autostart mode
removed "fix crash on exit" for homebrew applications
removed "use stub" option
added ciosx return to postloader (channel)
fixed a buffer overflow in game browser (thx DEFIANT)
packed with new default theme by pepxl and me. Thank pep (IMG:style_emoticons/default/wink.gif) (soon a new theme package with all featured themes)
NOTE: this version will clear all configuration files (autoboot settings... etc.etc.) postLoader 4.b42
fixed covers for channel browser (thx daxtsu)
postLoader 4.b41
Added support for DM2.2 (previous versions of DM are no more supported)
Removed "DM(L): Video mode" when in devolution mode
Devolution: added video configuration like the sample loader
plugin.con and icons are now in the separated plugin package (actually v3)
fixed a crash when the stub is dumped the first time
postLoader 4.b40
better stub handling (postloader forwarder channel is now required to go back to postloader)
gamecube games browsing is now fixed
fixed the crash on exit of some homebrews
postLoader 4.b39
corrected iso nomes in devolution mode (thx daxtsu)
postLoader 4.b38
postLoader will now ask to dump your hbc stub. This is required one. You cannot do this in neek2o, as postloader must be executed by hbc to save the stub.
corrected font size on some menu
postLoader 4.b37
di, corrected a return value checking for gamecube/wii disc
updated usbstorage to latest used in usbloaderGX/wiiflow (still postloader has problems running with ciosx v9)
devolution has problems with FIX94 stub, like the old stub postloader was using (take from priiloader). Using the stub from hbc1.1.0 it works as should. This is a temporaly solution.
support for gc games in /games/.iso (only in devolution mode). A game rebuild is required when changing mode. This is done automatically
postLoader 4.b36
Adopted stub by FIX94
Before devo is executed, stub is updated even if "Patch stub and use return to HBC method" is not active
code clean
Corrected online menu font size
fixed sorting issues in homebrew browser
di module should now support gamecube retail disk
(note that you have to comment #define DOLPHINE in globals.h to make a working dol) postLoader 4.b35
added support to Devolution. (thx to tueidj (sample loader) / fix94 (wiiflow implementation) / daxtsu-wever-gartmiusprime (testing))
loader.bin must be copied in /ploader/plugins.
images must be in /games//game.iso (like dml).
postloader will check if a gc memory card is present, if no, emulated one is used.
emu filters shown now only plugins with associated roms
up to 16536 roms can be browsed (even if I think is a crazy number, but until ram is available....)
adjusted roms structure (about 192Kb are saved).
"go to page" adjusted to be able to manage all that roms (kuwanger)
added mutex on covercache_get. This may have solved postloader random hang
added better and faster control for missing covers, so covercache thread don't need to check for them.
new case insensitive strstr. This give a general speedup to postloader (http://www.daniweb.com/software-development/c/code/216564/strings-case-insensitive-strstr)
code clean
postLoader 4.b34
increased the buffer for filter menu (thx kuwanger)
now postLoader uses single or double fb as required
performed a lot of code clean (thx kuwanger)
it seems that b34 has stopped to randomly hang
postLoader 4.b33
wiiload (network) has been rearranged to allow file of (almost) any dimension to be transferred. Now sd or usb dev are used to bufferize the transfer. With a slow sd based setup (/ploader folder on sd), some dalays are possibile.
wiiload accepts wads files via wiiload protocol. If a wad is send to postloader, postloader will move it to sd://wad (or usb://wad if sd is not available)
added emuicons for roms without cover (see plugin.conf). Covers height and width must be divisible by 4
corrected displaying of hidden games
postLoader 4.b28
removed crosscheck of dml for sd games. This will give a great speedup for fst games scan, but will not check consistency from game on usb and the same on sd. (thx FIX94 for pointing that)
removed an useless space check during dml scanner
corrected autorepeat for wiimote keys (you can now keep +/- pressed to change pages)
fixed classic controllers button and key repeat (thx daxtu!)
added DML1.x and DM2.x cheats support (thx daxtu)
removed source path from emulators filters (thx wever)
corrected DM2.x game search (games on both sd and usb where not listed) (thx wever)
remove bottom bar neek icon when postloader is already running in neek (thx wever)
corrected gamecube game section under neek
postLoader 4.b27
DM should now to work also without SD
Moved "Exit" button to the far right of bottom bar
Added "Restart postLoader" to Exit menu
Added very basic virtual keyboard
Added NMM option to DML 1.x and DM 2.x modes
Added "parental control" password (CONFIG->Set parental control). This will disable all advanced and dangerous for kids options of postloader. If you loose your password you have to delete /ploader/ploader.cfg
postloader configuration file (ploader.cfg/pldneek.cfg) is better checked for inconsistency
fixed postloader issue with genplusgx plugin
Added proper boot screen when executing dm/dml
Game preview for emulators is now bigger
postLoader 4.b26
fixed .conf corruption caused by recently changes in cfg library. postLoader should be able to recover actual corrupted files. Otherwise delete any *.conf and channels.* from /ploader folder
postLoader 4.b25
fixed channels sorting/hiding
fixed crash with more than 1500 emu
fixed jump to page (now if there are more then 100 pages, page selection is every 5)
covercache semaphores are now volatile. Hoping in no more casual hangs
(B) should now interrupt USB mounting
Changed "WII menu" button to "Exit..". Now you can exit to 1) system menu, 2) homebrew channel, 3 shutdown. Button need to be moved to right... next rel...
Neek button will now ask the method: 1) direct (for neek2o, no sd required), 2) IOS254 (bootmii/neek sd required)
Added "change default ciosx" to channel mode
Added support for DM. Press [HOME]->Gamecube Mode: DM 2.x
plugins.conf parsing is complete. You should be able to add any plugin from wiiflow (thx FIX94) and configure it for postloader. Plugin must be copied in /ploader/plugins
speedup on wiiload deinit
priibooterGUI 2.8: should now save correctly nands folders information (required by postloader for old mode nand changer)
postLoader 4.b24
fixed a memory leak when browsing emulators
added some debug messages during emu scanning
corrected snes section of plugins.conf
postLoader 4.b23
DML: both fst and iso are supported correctly
postLoader 4.b22
Fixed execution of settingEditor GUI and wiimod when one of them is missing
Corrected sort order for DML
Now DLM works with v. 1.5 (thx to FIX94:dios-mios-booter)
Added a debug message to nandBooter
postLoader 4.b21
nandBooter 2.3: applyed the previous patch in the right way
Corrected a crash if no plugins.conf file is found in emulators
postLoader 4.b20
enabling console in nandBooter debug mode has solved the issue on channel execution (thx AbdallahTerro for testing)
postLoader 4.b19
nandbooter: If fails something it will try to write log to sd
nandbooter: corrected a possible bug on nand mount
postLoader 4.b18
recompiled nandbooter
corrected wiiload thread stop
postLoader 4.b17
added some debug message
corrected a bug on device unmount
added initial support for plugin configuration file (now required for emulators)
postLoader 4.b16
corrected a memory corruption that can occurs when booting channels
postLoader 4.b15
corrected a bug that was causing postloader fails execution of a .dol ("postLoader was unable to load: .....")
retouched again covercache thread priority
moved to mem1 covercache structure (but textures are still in mem2)
sorting issues should be fixed
updated covers download links to gametdb
postLoader 4.b14
lowered covercache thread priority
added wii64 to emulators. Roms in /wii64/rom
postLoader 4.b12
solved an issue from covercache on dol/elf loading to mem2
added a check on dol loading
postloader will now create the folder for emulator screenshots (covers.emu)
changed some wrong text
postLoader 4.b11
d-cross up select wii games/dml. down for emu.
added selection for dml mode (0.x for < 58, 1.x for new dml)
added more video modes for dml (only 1.x mode)
added nodisc and padhook flags in per game settings (only 1.x mode)
wbfs games on first FAT32 partition can be booted via neek2o from real nand (neekbooter 1.4 is required as priiloader autoboot installed file in /nand/pl2o nand image)
note: genplus doesn't work for me
postLoader 4.b10
corrected a bug in grlib drawimage functions, that may not scale correctly the texture
covercache: fixed threading and now start caching current page items instead of previous one.
icons: fixed possible fault with long text
postLoader 4.b9
huge speed improvment in importing emu snapshots
Added support for genplusgx emulator
postLoader 4.b8
postLoader is capable of import saved snapshots as covers (fceugx, vbagx, snes9xgx)
rendering speedup checking and disabling offscreen objects
postLoader 4.b7
in dol embedded configuration is stored only when needed (great speedup on hb start)
corrected long filenames exception for emulators
postLoader 4.b6
Integrated uid.sys manager for neek is partially working. Press [home] in channel mode (under neek2o/neek)
Now hb apps are loaded directly to mem2... launching is even faster
Added emulator support for fceugx, vbagx
postLoader 4.b5
Changed the HDD keep live function
Updated all sorting functions to qsort
Changed escape code for TTF flags, as char 255 caused wrong behaveur in mbstowcs
new TTF width caching system, with full support for wide chars
fixed icon font size during scrolling
postLoader 4.b4
Changed a lot of on-screen informations
Corrected a bug on apps name from xml in homebrew mode
Corrected a bug on channels name
postLoader 4.b3
Adjusted position of some user inteface items...
Semplified HOME menu for all modes
Added a direct shortcut for Setting Editor GUI in the bottom bar (S.E. Gui must be installed in /apps/SettingsEditorGUI/ or /apps/Settings Editor GUI/)
postLoader 4.b3
Added texture based cache system for GRRLIB ttf implementation
Added a cache for ttf character size in GRRLIB
emuBrowser: now using qsort for sorting
Added topbar for selecting browser mode
Added bottombar for selecting about/setup/disc/neek(bootmii)/setting editor (if installed)
Now disc is checked before starting it.
priibooterGUI 2.7: little change in fade timing to give a little more time to press a key on wiimote
postLoader 4.b1
Now postLoader uses TTF fonts
Fixed a bug on GRRLIB when measuring character width (TTF)
Fixed a bug on homebrew parameters detection
Corrected some memory allocation bugs
Added emulator page (actually only snes9xgx, and roms must be in /snes9xgx/roms). A great THANK to fix94 for his hard works on emulators
Corrected a random bug that was causing the hang of cover cache thread.
* added USB_Deinitialize(). May help executed application that reload ios58 without checking if they are already in 58 * fixed neek_UID_Add memory allocation * forwarder channel v5: Added video initialization code and an on screen message...
* now using the open source stub by fix/megazig. Old stub.bin can be removed from /ploader folder * Fixed a dump with neek2o diconfig.bin file. * devolution: postloader support now creation/managment of up 8 card images, per game selecatable. memcard.bin, memcard1.bin....memcard7.bin (also _jap equivalent) * Changed a bit the selection screen * some code clean
Mise à jour de la news suite à la sortie de la version 4.1.1. Mais, c'est qu'il se décide à reprendre vie, le bougre ! (IMG:style_emoticons/default/biggrin.gif)
? Sujets plus anciens
? News Homebrews
? Sujets plus récents ?
2 utilisateur(s) sur ce sujet (2 invité(s) et 0 utilisateur(s) anonyme(s))
0 membre(s):
Modes d'affichage:Standard ?
Passer au mode: Linéaire+ ?
Passer au mode: En ligne
?
?postLoader 4.1.1
·
?
24 Jul 2012, 06:48 
Helper
